MS Flange

Product Details:

CS A105 BLRF Flanges 150 ASME 16.5 32NB refers to a specific type of carbon steel flange with a 150 psi pressure rating designed for use in piping systems. Here's a breakdown of each term:

• CS stands for Carbon Steel, a widely used material in the manufacturing of flanges, pipes, and fittings. It is durable, cost-effective, and has high tensile strength, making it suitable for general-purpose applications.
• Carbon steel is commonly used in applications involving the transport of water, gas, steam, and other general fluids, though it may require protective coatings for corrosion resistance in certain environments.

• A105 refers to the ASTM A105 standard, which defines the specifications for carbon steel flanges, fittings, and valves used in piping systems. It is commonly used for general industrial applications involving moderate temperatures and pressures (up to around 800°F or 425°C).
• This standard ensures the flange is made from forged carbon steel that meets specific mechanical properties, dimensions, and pressure ratings.

• BLRF stands for Blind Flange, Raised Face. A blind flange is used to seal the end of a pipeline, effectively blocking the flow of fluids in the pipe. This type of flange is solid and does not have an opening.
• The raised face refers to the area around the bolt holes, which is raised slightly above the rest of the flange's surface. This raised portion helps create a better seal when the flange is bolted to another part of the piping system by increasing pressure on the gasket.
• Blind flanges are typically used to close the end of a pipeline or to provide access points for inspection and maintenance in high-pressure systems.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

• FunctionAn orifice flange measures the flow rate of a commodity through a piping system. It does this by restricting the flow with an orifice plate, which creates a pressure difference that can be used to measure the flow rate. 
• FeaturesOrifice flanges have a hole drilled through the face of the flange, perpendicular to the pipe. They also have jack screws, which are bolts that help separate the flanges so the orifice plate can be inspected or replaced. 
• AssemblyAn orifice flange assembly typically includes two flanges, an orifice plate, bolts, nuts, gaskets, jacking screws, and plugs. 

Product Details:

CS A105 SORF Flanges 600 ASME 16.5 50NB refers to a specific type of carbon steel flange used in piping systems, with certain characteristics as described below:

1. CS (Carbon Steel):

   • CS refers to Carbon Steel, a common material used in the manufacturing of flanges and other piping components. Carbon steel is durable, strong, and cost-effective, making it a popular choice for general-purpose applications.
   • Carbon steel flanges are resistant to mechanical stress and can handle moderate to high-pressure environments, but they may require additional coatings to prevent corrosion in certain environments.

2. A105:

   • A105 refers to the ASTM A105 standard, which specifies the requirements for carbon steel forged flanges, fittings, and valves that are used in piping systems. These materials are typically used in pressure systems where temperatures do not exceed 425°C (800°F).
   • The A105 standard is often used for flanges in systems handling steam, water, gas, and oil.

3. SORF (Slip-On Raised Face):

   • SORF stands for Slip-On Raised Face. This refers to the design of the flange.
     • Slip-On: The flange is designed to slip over the pipe and then is welded both on the inside and outside for a secure connection.
     • Raised Face: The raised part of the flange face (the area that contacts the gasket) allows for a better seal when the flange is bolted to another flange, improving leak resistance.
   • This flange design is commonly used in low- to medium-pressure applications and is easier and cheaper to install compared to other types of flanges like Weld Neck Flanges.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

CS A105 LJFF Flanges 300 ASME 16.5 50NB refers to a carbon steel flange designed for use in piping systems, with specific characteristics related to pressure rating, material, design, and size. Here’s a detailed breakdown of each term:

• CS stands for Carbon Steel, a material widely used in flanges and other piping components. Carbon steel is durable, cost-effective, and provides good strength for handling moderate pressures and temperatures.
• It is suitable for a wide range of industrial applications, including oil and gas, chemical, and water systems, though it may need protective coatings to prevent corrosion in harsh environments.

• A105 refers to ASTM A105, a standard specification that defines the requirements for carbon steel forged flanges, fittings, and valves used in piping systems. The A105 standard is often used for applications that involve moderate temperatures and pressures, typically up to 425°C (800°F).
• Flanges manufactured to ASTM A105 standards are widely used in oil and gas, water systems, and other industrial applications.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

• FunctionFlanges are used in many industrial and building applications to connect pipes, equipment, or other objects. They can also be used to strengthen or stiffen an object, or to stabilize and guide its movements. 
• PartsA flange has two main parts: a flange face and flange connection holes. The flange face is mounted onto the object being connected, while the flange connection holes are used to attach the flange to other objects. 
• AttachmentFlanges are often attached using bolts in a circular pattern. They can be screwed or welded to the object being connected. 
• SealingFlanges are used to seal pipe systems to prevent leaks. The pressure applied to the mating sealing surfaces causes the two faces to crush a gasket or press together. 
• MaintenanceFlanges allow for easy access for maintenance, inspection, and modification. They can be used to connect or disconnect pipes without welding, which simplifies installation and reduces downtime. 
• StandardsFlanges are usually manufactured to standards such as ANSI (American National Standards Institute) or DIN (Deutsches Institut für Normung). These standards define the dimensions, shapes, and locations of the connection holes. 

Product Details:

• FunctionFlanges are used in many industrial and building applications to connect pipes, equipment, or other objects. They can also be used to strengthen or stiffen an object, or to stabilize and guide its movements. 
• PartsA flange has two main parts: a flange face and flange connection holes. The flange face is mounted onto the object being connected, while the flange connection holes are used to attach the flange to other objects. 
• AttachmentFlanges are often attached using bolts in a circular pattern. They can be screwed or welded to the object being connected. 
• SealingFlanges are used to seal pipe systems to prevent leaks. The pressure applied to the mating sealing surfaces causes the two faces to crush a gasket or press together. 
• MaintenanceFlanges allow for easy access for maintenance, inspection, and modification. They can be used to connect or disconnect pipes without welding, which simplifies installation and reduces downtime. 
• StandardsFlanges are usually manufactured to standards such as ANSI (American National Standards Institute) or DIN (Deutsches Institut für Normung). These standards define the dimensions, shapes, and locations of the connection holes. 

Product Details:

Carbon Steel 310 WNRF Flange refers to a carbon steel flange made with the material Grade 310, featuring a Weld Neck Raised Face (WNRF) design. Let’s break down each part of this specification to understand the characteristics and applications of this flange:

• Carbon Steel is a commonly used material for flanges and other pipe fittings. It offers good strength and durability while being relatively cost-effective.
• While carbon steel is strong and versatile, it is prone to corrosion in some environments, especially when exposed to moisture or aggressive chemicals, so it may require coatings or painting for corrosion resistance.
• Carbon steel flanges, such as the 310, are suitable for moderate-pressure applications and are widely used in industries like chemical, petrochemical, water treatment, and oil and gas.

• Grade 310 refers to a specific type of austenitic stainless steel. It is an alloy that contains chromium and nickel, giving it excellent resistance to high-temperature oxidation and corrosion. However, Carbon Steel 310 may be a bit of a confusion in this context, as 310 is primarily associated with stainless steel.
• If the material is indeed carbon steel, it might refer to a specification or designation of carbon steel that is designed for higher temperature resistance than typical carbon steel grades.
• Grade 310 stainless steel is highly resistant to high temperatures (up to 1150°C or 2100°F) and is typically used in high-temperature applications, like furnaces, heat exchangers, and boilers.

Additional Information:

• Delivery Time: READY STOCK AVAILABLE